Product Description
Sprinkler irrigation facilitates strict control of soil moisture, so that soil moisture is maintained in the most suitable range for crop growth. Moreover, the dust on the stems and leaves of plants can be washed away during sprinkler irrigation, which is conducive to plant respiration and photosynthesis. In addition, sprinkling irrigation does not cause erosion and other damage to the soil, so as to maintain the soil's aggregate structure, make the soil loose and porous, good ventilation, so it is conducive to increasing production, especially for vegetables.
Sprinkler irrigation has strong adaptability to various terrain, and it does not need to smooth the land like ground irrigation, and can be carried out on sloping land and undulating ground. Especially in the sandy soil with thin soil layer and strong water permeability, it is very suitable for sprinkler irrigation. In addition, sprinkler irrigation is not only suitable for all field crops, but also for all kinds of cash crops, vegetables, grasslands can obtain good economic results. Sprinkler irrigation has many advantages, suitable for landscape greening, agricultural irrigation and other scenes, can be remote automatic control irrigation, precision irrigation, water saving and energy saving
The irrigation efficiency of a drip belt depends on a number of factors, including pump flow, drip belt design, drip head flow, irrigation system pressure, crop type and planting density, soil type, and irrigation time. In general, the amount of water droplets in drip irrigation systems can be adjusted to suit different crop and soil conditions.
Detailed Photos
3 inch double impeller spray irrigation booster pump
|
:Pressure is high enough to lift
|
Irrigation system pressure, crop type and planting density, soil type and irrigation time, etc. In general, the amount of water droplets in drip irrigation systems can be adjusted to suit different crop and soil conditions. A sprinkler pump with a drip irrigation belt can irrigate about 6 acres of land. The actual situation may be reduced due to the uniformity of the drip irrigation system, pressure loss in the pipeline, dropper blockage, evaporation and leakage. Therefore, in actual operation, it is necessary to adjust according to the specific situation to ensure the uniformity and efficiency of irrigation. .
If the pump in the use of the process of strong vibration at this time must stop to check what is the reason, otherwise it will also cause damage to the pump.
When the bottom valve of the pump leaks, some people will fill the inlet pipe of the pump with dry soil and flush the valve with water, which is not advisable. Because when the dry soil is put into the water inlet pipe when the pump starts to work, this dry soil will enter the pump, which will damage the pump impeller and bearings, which shortens the service life of the pump. When the bottom valve leaks, it must be repaired, if it is very bad, it needs to be replaced with a new one.
After the use of the pump must pay attention to maintenance, for example, when the pump is used up to put the water in the pump clean, it is best to remove the water pipe and then rinse with water.
){kind=link}