Product Description
This product adopts the template and the press roll is made of alloy steel after special treatment. Under the action of friction, the spindle and the flat die drive the press roll to rotate, the press roll and the template produce high temperature to mature the starch and coagulate the protein. The particles are discharged from the die hole under the press roll extrusion, and the particles are sent out of the machine through the shake plate. The feed pellet machine of Quanhong Machinery is mainly suitable for the processing and production of various livestock, poultry and aquatic pellet feed in medium and small scale breeding households, which can reduce the breeding cost. Can be used to raise rabbits, chickens, ducks, farming industry can not be separated from the feed required by farming, simple food weeds can not meet the nutritional needs of breeding varieties. Feed pellet machine solves this problem, can be very good weed food according to a certain proportion of maturation synthesis together, to achieve long-term storage, the effect of balanced nutrition, breeding varieties have been sufficient nutrition. Shorten the breeding cycle, bring considerable economic benefits! Based on many years of production experience, the company continues to innovate products, the production of feed pellet machine, wood pellet machine and so on. Products double press roller granule machine, three press roller granule machine, template, press roller, are all quenched process, with pressure and wear resistance longer service life, more comfortable grain!
Detailed Photos
Product Parameters
Multi-specification feed granulator
|
Feed pellet machine output is too low or even no grain or a lot of powder, although this problem does not often occur, but if it occurs, it means that you do not grind the press wheel and the grinding disk well during the grinding process of the pellet machine, the reason for similar problems may also be the poor finish of the grinding disk for the first time, after grinding the disk with abrasive material or after using it for a period of time. The output of the pellet machine will reach the normal output.
2. The feed moisture content is not well mastered will also affect the discharge of the pellet machine, the moisture in the raw materials should be mastered at 13%-20%, because the pellet machine has the drying and curing function, the moisture in the raw materials will be dried out during the pellet machine pressing process, and the pellets pressed out by the pellet machine can be bagged under normal temperature conditions for 5-10 minutes.
3. The gap between the press wheel and the grinding disc of the pellet machine is too large, which may also be one of the reasons for the pellet machine not to discharge the material. The method of adjusting the gap between the press wheel and the grinding disc is to twist the pressure wheel with one hand, adjust the corresponding bolts, and adjust the pressure wheel on both sides to shake firmly, and the state is slightly tight, which means that the pressure wheel and the grinding disc have been adjusted in place.
){kind=link}