Feed Processing Machine for Livestock
Discover the Feed Processing Machine for Livestock by Shandong Yilu Machinery Co., Ltd. Ideal for agricultural feed processing, this equipment is a must-have for livestock feed production. Get yours today!
Product Description
Feed pellet machine common faults and troubleshooting methods:
First, the pellet machine must first fill the butter after receiving, and it is necessary to fill the butter once every 15 days. (Need to choose high temperature resistant butter)
Second, the pellet machine just received will not reach the normal output, which is a normal phenomenon, because the pellet machine is all new machines, the pellet machine has not reached a good running state, after the machine is used for a period of time, the pellet machine parts run into the state, the pellet machine output and discharge quality will reach a good state, please understand.
1. Feed pellet machine output is too low or even no grain or a lot of powder, although this problem does not often occur, but if it occurs, it means that you do not grind the press wheel and the grinding disk well during the grinding process of the pellet machine, the reason for similar problems may also be the poor finish of the grinding disk for the first time, after grinding the disk with abrasive material or after using it for a period of time. The output of the pellet machine will reach the normal output.
2. The feed moisture content is not well mastered will also affect the discharge of the pellet machine, the moisture in the raw materials should be mastered at 13%-20%, because the pellet machine has the drying and curing function, the moisture in the raw materials will be dried out during the pellet machine pressing process, and the pellets pressed out by the pellet machine can be bagged under normal temperature conditions for 5-10 minutes.
3. The gap between the press wheel and the grinding disc of the pellet machine is too large, which may also be one of the reasons for the pellet machine not to discharge the material. The method of adjusting the gap between the press wheel and the grinding disc is to twist the pressure wheel with one hand, adjust the corresponding bolts, and adjust the pressure wheel on both sides to shake firmly, and the state is slightly tight, which means that the pressure wheel and the grinding disc have been adjusted in place.
| Q: What are your packing conditions? |
| A: Generally wooden cartons, according to customer requirements. |
| Q: What are your terms of payment? |
| A: Payment by wire transfer. |
| Q: What's your delivery time? |
| A: Generally, it takes 7-30 days after receiving your payment. The exact delivery time depends on the items you order and the quantity. |
| Q: Can you produce to sample? |
| A: Yes, we can produce according to the sample confirmed by the customer. |
| Q: Do you test all goods before delivery? |
| A: Yes, we have 100% testing before shipping. |
){kind=link}