Product Description
Sprinkler irrigation is easy to realize mechanization and automation, and can save a lot of labor. Because of the cancellation of the field water channel, not only conducive to mechanical operations, but also greatly reduce the amount of field labor. Sprinkler irrigation can also be combined with the application of chemical fertilizers and pesticides, and can save a lot of labor, according to statistics, the amount of labor required for sprinkler irrigation is only one-fifth of the ground irrigation.
Improve land utilization rate: When using sprinkler irrigation, there is no need for irrigation ditches and ridges in the field, which can make full use of cultivated land and improve land utilization rate more than ground irrigation, and generally increase the cultivated area by 7% to 10%.
Sprinkler irrigation facilitates strict control of soil moisture, so that soil moisture is maintained in the most suitable range for crop growth. Moreover, the dust on the stems and leaves of plants can be washed away during sprinkler irrigation, which is conducive to plant respiration and photosynthesis. In addition, sprinkling irrigation does not cause erosion and other damage to the soil, so as to maintain the soil's aggregate structure, make the soil loose and porous, good ventilation, so it is conducive to increasing production, especially for vegetables.
Detailed Photos
Product Parameters
Supporting different driving forces
|
Irrigation pumps for different crops
|
3 inch single impeller sprinkler pump
|
The irrigation efficiency of a drip belt depends on a number of factors, including pump flow, drip belt design, drip head flow, irrigation system pressure, crop type and planting density, soil type, and irrigation time. In general, the amount of water droplets in drip irrigation systems can be adjusted to suit different crop and soil conditions. A sprinkler pump with a drip irrigation belt can irrigate about 6 acres of land. The actual situation may be reduced due to the uniformity of the drip irrigation system, pressure loss in the pipeline, dropper blockage, evaporation and leakage. Therefore, in actual operation, it is necessary to adjust according to the specific situation to ensure the uniformity and efficiency of irrigation. After the use of the pump must pay attention to maintenance, for example, when the pump is used up to put the water in the pump clean, it is best to remove the water pipe and then rinse with water.
The interface between the pump and the pipeline must be sealed, because if there is debris entering it will cause damage to the inside of the pump. The bearing on the pump is also the focus of inspection, check whether the bearing is worn after use, if the pump is used for a long time, the small ball in the bearing will be broken, so when the pump is used after the bearing is coated with a layer of lubricating oil to better protect the pump bearing.
){kind=link}