Product Description
Sprinkler irrigation facilitates strict control of soil moisture, so that soil moisture is maintained in the most suitable range for crop growth. Moreover, the dust on the stems and leaves of plants can be washed away during sprinkler irrigation, which is conducive to plant respiration and photosynthesis. In addition, sprinkling irrigation does not cause erosion and other damage to the soil, so as to maintain the soil's aggregate structure, make the soil loose and porous, good ventilation, so it is conducive to increasing production, especially for vegetables.
Strong adaptability: sprinkler irrigation has strong adaptability to various terrain, and it does not need to level the land like ground irrigation, and can be sprayed on slopes and uneven ground. Especially in the sandy soil with thin soil layer and strong water permeability, it is very suitable for sprinkler irrigation. In addition, sprinkler irrigation is not only suitable for all field crops, but also for all kinds of cash crops, vegetables, grasslands can obtain good economic results. Sprinkler irrigation has many advantages, suitable for landscape greening, agricultural irrigation and other scenes, can be remote automatic control irrigation, precision irrigation, water saving and energy saving
Detailed Photos
Product Parameters
3 inch single impeller sprinkler pump
|
Single cylinder diesel power
|
Single cylinder diesel power
|
Belt connectionHigh
|
The irrigation efficiency of a drip belt depends on a number of factors, including pump flow, drip belt design, drip head flow, irrigation system pressure, crop type and planting density, soil type, and irrigation time. In general, the amount of water droplets in drip irrigation systems can be adjusted to suit different crop and soil conditions. A sprinkler pump with a drip irrigation belt can irrigate about 6 acres of land. The actual situation may be reduced due to the uniformity of the drip irrigation system, pressure loss in the pipeline, dropper blockage, evaporation and leakage. Therefore, in actual operation, it is necessary to adjust according to the specific situation to ensure the uniformity and efficiency of irrigation. .
2, if the pump in the use of the process of strong vibration at this time must stop to check what is the reason, otherwise it will also cause damage to the pump.
3, when the bottom valve of the pump leaks, some people will use dry soil to fill the inlet pipe of the pump, water to the bottom of the valve, such a practice is not advisable. Because when the dry soil is put into the water inlet pipe when the pump starts to work, this dry soil will enter the pump, which will damage the pump impeller and bearings, which shortens the service life of the pump. When the bottom valve leaks, it must be repaired, if it is very bad, it needs to be replaced with a new one.
4, the pump must pay attention to maintenance after use, for example, when the pump is used up to put the water in the pump clean, it is best to remove the water pipe and then rinse with water.
){kind=link}