Product Description
Rotary tilling machine is designed according to hills, mountains, small plots, large height difference, and no machine tilling road. Suitable for sandy land, economic planting of soil loosening, ploughing and weeding. Widely used in field farming, furrow building, plastic greenhouses, nurseries, orchards, vegetable garden management, tea and other planting operations, with light weight, small size, simple structure, easy operation, easy maintenance, low fuel consumption. Mainly used in rice fields and vegetable fields, but also used in orchards. Heavy horizontal axis rotary tiller tillage depth of up to 20 to 25 cm, mostly used for cultivation of shrub land, marsh and grass wasteland farming. The working parts include a rotary plow cutter roller and a number of soil cutting blades evenly configured according to multiple spiral lines, driven by the tractor power output shaft through the transmission device, and the common speed is 190 ~ 280 RPM. The rotation direction of the knife roller is usually consistent with the direction of the tractor wheel rotation. High production efficiency can loosen the hard soil under the fruit tree and facilitate fertilization. Using this product can quickly and easily complete the work, instead of tiring and heavy traditional farming methods.
The rotary cultivator uses the power output of the engine to drive the rotary blade, cut and turn the soil, and throws the cut dirt back, hitting the mud shield, causing the dirt to break further. The ground is scraped to level the surface. Plow and rake all at once.
Detailed Photos
Product Parameters
Supporting a variety of power use hand tractor
|
Machine size:middle-sized
|
scope of application:agroforestry
|
And raise the rototiller to a very high position.
Maintenance of rotary tiller
Note that when checking the rotary tiller, the power must be cut off first. When repairing and maintaining the rotary tiller, the tractor must be turned off. Maintenance is divided into each shift maintenance, quarterly maintenance and annual maintenance.
Maintenance per shift is maintenance performed at the end of each shift or every 10 hours.
The contents of each shift maintenance are:
Dirt and weeds stuck to blades and blades.
Check and tighten each connection bolt and nut. Check each part of the latch, cotter pin for defects. If there is a defect, it should be replaced with a new part.
Check the oil in the gearbox. The distance between the oil level and the upper plane of the refueling hole should be between 220 and 260 mm. If less than 260 mm, should be replenished in time.
){kind=link}