Product Description
Sprinkler irrigation has strong adaptability to various terrain, and it does not need to smooth the land like ground irrigation, and can be carried out on sloping land and undulating ground. Especially in the sandy soil with thin soil layer and strong water permeability, it is very suitable for sprinkler irrigation. In addition, sprinkler irrigation is not only suitable for all field crops, but also for all kinds of cash crops, vegetables, grasslands can obtain good economic results. Sprinkler irrigation has many advantages, suitable for landscape greening, agricultural irrigation and other scenes, can be remote automatic control irrigation, precision irrigation, water saving and energy saving
The irrigation efficiency of a drip belt depends on a number of factors, including pump flow, drip belt design, drip head flow, irrigation system pressure, crop type and planting density, soil type, and irrigation time. In general, the amount of water droplets in drip irrigation systems can be adjusted to suit different crop and soil conditions. A sprinkler pump with a drip irrigation belt can irrigate about 6 acres of land. The actual situation may be reduced due to the uniformity of the drip irrigation system, pressure loss in the pipeline, dropper blockage, evaporation and leakage. Therefore, in actual operation, it is necessary to adjust according to the specific situation to ensure the uniformity and efficiency of irrigation.
Detailed Photos
Product Parameters
Supporting different power use
|
Do not add water suction pump
|
Belt connection or shaft connection
|
Irrigating equipment for agriculture
|
The irrigation efficiency of a drip belt depends on a number of factors, including pump flow, drip belt design, drip head flow, irrigation system pressure, crop type and planting density, soil type, and irrigation time. In general, the amount of water droplets in drip irrigation systems can be adjusted to suit different crop and soil conditions. A sprinkler pump with a drip irrigation belt can irrigate about 6 acres of land. The actual situation may be reduced due to the uniformity of the drip irrigation system, pressure loss in the pipeline, dropper blockage, evaporation and leakage. Therefore, in actual operation, it is necessary to adjust according to the specific situation to ensure the uniformity and efficiency of irrigation. .
2, if the pump in the use of the process of strong vibration at this time must stop to check what is the reason, otherwise it will also cause damage to the pump.
3, when the bottom valve of the pump leaks, some people will use dry soil to fill the inlet pipe of the pump, water to the bottom of the valve, such a practice is not advisable. Because when the dry soil is put into the water inlet pipe when the pump starts to work, this dry soil will enter the pump, which will damage the pump impeller and bearings, which shortens the service life of the pump. When the bottom valve leaks, it must be repaired, if it is very bad, it needs to be replaced with a new one.
){kind=link}