Product Description
The selection of irrigation pumps needs to consider many factors, such as the water quality of the water source, water flow and pressure, the topography and soil conditions of the farmland, as well as economic and environmental considerations. When purchasing and using the irrigation pump, it is necessary to carefully understand its working principle, technical parameters and operation methods to ensure its normal operation and achieve the desired irrigation effect.
The use of mechanical and power equipment, so that water through the nozzle (or nozzle) into the air, in the state of raindrops on the field irrigation method. Sprinkler irrigation equipment is composed of water inlet pipe, pump, water delivery pipe, distribution pipe and nozzle (or nozzle), which can be fixed, semi-fixed or mobile. It has the advantages of saving water, not destroying soil structure, regulating ground climate and not being restricted by terrain.
It is an irrigation method that sprays water with a certain pressure into the air and scatters it into small drops or forms mist to fall on plants and the ground with the help of pumps and pipeline systems or the use of natural water sources.
Detailed Photos
Product Parameters
Double impeller sprinkler pump
|
|
Irrigating equipment for agriculture
|
The irrigation efficiency of a drip belt depends on a number of factors, including pump flow, drip belt design, drip head flow, irrigation system pressure, crop type and planting density, soil type, and irrigation time. In general, the amount of water droplets in drip irrigation systems can be adjusted to suit different crop and soil conditions. A sprinkler pump with a drip irrigation belt can irrigate about 6 acres of land. The actual situation may be reduced due to the uniformity of the drip irrigation system, pressure loss in the pipeline, dropper blockage, evaporation and leakage. Therefore, in actual operation, it is necessary to adjust according to the specific situation to ensure the uniformity and efficiency of irrigation. .
2, if the pump in the use of the process of strong vibration at this time must stop to check what is the reason, otherwise it will also cause damage to the pump.
3, when the bottom valve of the pump leaks, some people will use dry soil to fill the inlet pipe of the pump, water to the bottom of the valve, such a practice is not advisable. Because when the dry soil is put into the water inlet pipe when the pump starts to work, this dry soil will enter the pump, which will damage the pump impeller and bearings, which shortens the service life of the pump. When the bottom valve leaks, it must be repaired, if it is very bad, it needs to be replaced with a new one.
4, the pump must pay attention to maintenance after use, for example, when the pump is used up to put the water in the pump clean, it is best to remove the water pipe and then rinse with water.
5, the tape on the pump should also be removed, and then rinse with water and dry in the light, do not put the tape in a dark and damp place. The tape of the pump must not be stained with oil, let alone coated with some sticky things on the tape.
6, to carefully check whether there is a crack on the impeller, the impeller is fixed on the bearing is loose, if there is a crack and loose phenomenon to timely maintenance, if there is dirt on the pump impeller to clean up.
){kind=link}